Mold is the mother of industry. It is precisely because of the existence of mould that products can be produced in large quantities. Injection molds and compression molding have become a part of the increasingly wide range of applications in the field of molds. Mould factories are in the process of producing injection moulds and compression moulds. Various types of precision equipment need to be involved, and finally a set of injection and compression molds can be manufactured and produced. So what equipment does a general mold factory have?
A machine tool that uses a milling cutter to process various surfaces on a workpiece; a milling machine can perform milling, drilling and boring on the workpiece.
Drilling machine
A machine tool that uses a drill to machine holes on a workpiece.This machine’s machining accuracy is relatively low and structure is simple. It can drill through holes and blind holes, replace special tools, and can expand, countersink, ream or tap.
Milling machine and Drilling Machine
Lathe for injection mold
A machine tool that uses a turning tool to turn a rotating workpiece. On the lathe, drills, reamers, taps, dies and knurling tools can also be used for corresponding processing.
Large water mill
use the grinding wheel to grind the workpiece to make it meet the required flatness.There has horizontal shaft and vertical shaft grinders based on different types of shafts.
The width and length of worktable is main parameter of rectangular worktable surface grinder, the main parameter of the table surface grinder is the diameter of the work table. According to the different types of shafts, it can be divided into horizontal shaft and vertical shaft grinders. Due to the large amount of heat generated during the working process, a large amount of coolant (usually water, sometimes oil) is used, so it has the nickname of a large water grinder.
CNC machining center
CNC machining center is a CNC machine tool controlled by CNC system. It can process very complex and difficult workpieces, which cannot be compared with ordinary ordinary machine tools, and the effect of processing workpieces is very good and the efficiency is very high. High, all operations can be completed after the workpiece is clamped once, because the CNC machining center has its own tool magazine, which can complete automatic tool change.
EDM
EDM (referred to as EDM) is a kind of mechanical processing equipment, mainly used for EDM. Widely used in the manufacture of various mechanical equipment and metal molds. It is a special processing method for removing conductive materials by using the electro-erosion effect generated by the pulse discharge between the two poles immersed in the working fluid, also called electrical discharge machining.
Wire cutting
Wire cutting belongs to the category of electrical processing. When the former Soviet Union Raza Lianke couple studied the phenomenon and cause of the corrosion damage of the switch contacts by spark discharge, they found that the instantaneous high temperature of EDM can cause localized metal melting and oxidation. It was corroded, thus creating and inventing the method of EDM. The wire cutting machine was also invented in the former Soviet Union in 1960, and my country was the first country to use it for industrial production.
WS MOLD insists on getting enough value return and feedback for every user who believes in us. In order to achieve the stability of product quality, we increase foreign production equipment at a large cost, and require Winsen people to achieve 200% ingenuity injection. In the selection of materials, We do not allow mistakes, and in craftsmanship, we do not allow laziness.
