What have to pay attention to using injection mould? The current plastic processing industry is quite developed. With the continuous advancement of material technology, the current injection molding process is becoming more and more mature, and many manufacturers have been able to master this technology well to manufacture and process plastics. In the process of injection molding, it is often necessary to use some molds. The quality of the mold directly affects the quality of the plastic product to a certain extent. Therefore, for the operator, it is a basic requirement to ensure the use of the mold. So what have to paid attention to in the use of injection moulds? Let’s take a look below.
Regularly check the molds you need to use
When using injection mould,and check whether the inner and outer surfaces of the used molds have quality defects. The basic requirement is that the surface is smooth without burrs and no cracks. If there is a quality problem in the mold, the quality of the subsequent processed plastic products will definitely not be guaranteed. After each injection molding process, pay attention to cleaning the used mold to ensure that there is no foreign matter inside and keep it clean.
What to pay attention to using injection mould
Pay attention to the engineering plastic particles used
When using the injection mold for processing, pay attention to the engineering plastic particles used. If the plastic particles have obvious problems of substandard quality, they should not be put into the injection mold for processing. Some inferior injection molds will adhere to the surface of the mold after heating in the injection mold, which is difficult to handle and affects the next use of the injection mold.
Pay attention to some performance parameters of the injection mold use
And ensure that the processing work is within the range of its performance requirements during processing. Otherwise, the improper selection of the injection mold will also cause problems in the quality of the injection mold.
When using injection molds, the main thing is to pay attention to the above basic problems. The current injection molding process can be said to be more and more mature and the hotter the better. Our factory specializes in injection molding and is quite confident in processing technology. All kinds of injection molded parts we process through injection molding have excellent performance in the market. If you are interested in our injection molding products, you can contact our staff at any time to learn more about our products.
Pay attention to rust prevention for injection mould
I believe that most people should be able to know that for all kinds of injection molds, the materials used in the production and manufacturing process are metal materials, and metal materials are in wet weather or in contact with In the case of some acid-base solutions, it is very likely that there will be rust or corrosion problems. In this way, the regulations will affect its surface finish, and even have a certain impact on the size. Therefore, in the process of using mold injection molding, it is necessary Be sure to prevent rust in various ways, for example, you can use anti-rust agent on its surface, so at the same time, water and corrosive substances must be effectively avoided during the disassembly and stripping process, so as to avoid rust rust.
Avoid deformation for injection mould
This is also a relatively important issue, because in the process of using injection molds for injection molding, collisions are likely to occur, which is difficult to avoid. Although collisions do not often occur, as long as the collision occurs It is more serious. At this time, this kind of mold may not be able to continue to be used. Therefore, in order to ensure that the products produced by using these molds will not have dimensional errors, it must be avoided when using them. , must be careful, for example, when disassembling the mold, it must be placed on a stable plane, and it must be stable when moving, only in this way can effectively avoid the deformation problem caused by bumping.
Replacement of wearing parts
In fact, when using an injection mold for injection molding, some friction may also occur, and this problem may occur every time it is disassembled and used, although it will not produce obvious friction every time after a long time The shape changes, but as long as long-term friction will definitely cause some parts to deform, this will cause a large error in the size of the produced product, which will affect the overall accuracy and quality, so in this case Next, for some parts that are easy to wear and tear used in the mold, they must be replaced in time. Only in this way can we ensure that there will be no obvious dimensional errors when using these molds for production. In this case, the products produced Only then can it be recognized by consumers and customers.
In fact, for many plastic products, they are produced by mold injection molding, but when molds produced by various mold companies, we must pay attention to the above-mentioned problems, and also need to do maintenance and maintenance work , so as to prolong its service life.
